�� Dedicated design servo specialized for two-wheel drive!

RSx 3 - one 10 Ver. D which inherited the genes of RSx One 10. which has been active in a number of races. is a dedicated design servo dedicated to the second drive.

Equipped with an aluminum top case with stylish laser engraving and milling processing on the case size of a ropero type ideal for 1/10 category. Inheriting the smooth and linear operation unique to RSx. it will be possible to achieve dynamic drift with a high vehicle feeling. The problem of hunting. which is prone to cause problems when using a gyroscope with 2-wheel drive. is also difficult to occur with RSx3-one10 Ver.D. Five types of data that match various road conditions and usage are already installed.

Please try experiencing drift driving up a notch.


�� Top case of stylish laser engraving + milling processing
Laser marking processing is done on 3 sides for the top case. 2 sides for the middle case. In addition. we have secured a sophisticated image with advanced milling cutting process. By making the alumite color chic black. you can install it without incongruity regardless of what type of drift chassis you install.
The middle case adopts accent milling processing for aluminum heat sink with excellent heat radiation efficiency. the gear adopts metal gear (some gear is resin gear).

�� Excellent compatibility with drift-only gyro KG-X
Milling processing and laser engraving are compatible with drift-only steering assist gyro KG-X. Operating characteristics are also optimized when used in combination with KG-X.

�� This product KG-X is not included.
Please use SG - 1 which is set with RSx 3 - one 10 Ver. D and KG - X. servo model selector set.

�� Black servo lead easy to handle
Commitment also extends to servo leads. The appearance and tightening black cable has the softness optimum for handling while securing the necessary current capacity.

�� New High Speed Communication System HCS compatible
The communication processing time of the receiver and the servo was compressed to 1/4. the operation feeling of the servo became more direct.
Since HCS compatible servo automatically discriminates the signal from the receiver. it can be used without setting any receiver regardless of HCS compliance or non-compliance.

When using with HCS. please use in combination with compatible receiver KR - 415FHD.


�� Prepare 5 different presets!
5 types of presets are registered in RSx 3 - one 10 Ver. D in advance. By switching here with the servo model selector. it is possible to easily change to the setting that suits the machine and the course. We cover all users from beginners to experts. and it is possible to set according to road conditions.
��Model 1�� Easiest: easy to maneuver setting
��Model 2�� Easy: Easy to maneuver setting
��Model 3�� Standard: Standard setting (factory setting)
��Model 4�� Fast: Fast setting
��Model 5�� Expert: Setting for experts


��spec��
(At 7.4 V)
�� Torque: 8.2 Kg · cm Speed: 0.08 sec / 60 ��
(At 6.0 V)
�� Torque: 7.0 kg · cm Speed: 0.09 sec / 60 ��
�� Size: 40.5 �� 26.5 �� 21 mm (rope type)
Weight: 48.0 g
�� Power supply: 6.0 to 7.4 V
(Lipo. Refee. Nickel Hydrogen. NiCad)
�� Aluminum Final Gear
�� Internal brass gear (some resin gear)
�� Coreless motor
�� Dual ball bearing
�� Aluminum top case
�� Aluminum heat sink middle case
�� Black cable
�� Gold-plated connector
�� HCS compatible

�� Recommended categories
1/10 electric drift car