��spec��
�� Speed controller for motor with brush
�� Size / 32.6 �� 29.0 �� 19.4 mm
�� Weight / 25.3 g (body only)
�� Supported motor turns / unlimited
�� Instant maximum current / 1200 A (FET spec)
�� Continuous maximum current / 300 A (FET spec)
�� Rated current / 120 A (FET spec)
�� Drive frequency / about 1.51 KHz (factory setting)
�� Input voltage / 6.6 ~ 8.4V
BEC output / 6.0 V 3A (with protection circuit)

��Characteristic��
�� ESC with normal evolution back of VFS-FR that was popular with ease of use.
�� Equipped with forward. brake and back functions.
�� Black cord is adopted for all wiring.
�� The top case is gunmetal plating processing.
�� Ultimate Booster 2 installed.
�� Ultimate condenser 35V included.
�� BEC output 6V 3A.
�� VFS function that can be set with 64 stages of frequency from 500 Hz to 5.3 kHz at each position where the advancing side is divided into 32 is equipped and it is possible to change to your favorite throttle feeling.
�� Recommended settings for stock motor racing are installed at shipment.
In the recommendation setting you can use up to the following number of turns.
If you use a motor with even higher output please adjust the parameter.
[LiPo] 12 T or more is recommended
[LiFe. NiMH] 23 T or more is recommended
�� Back cancellation is possible when ESC single item is set up.
�� Heat protector equipment.
�� LiPo cut equipment (shipped. can be changed to NI battery with ICS function)
�� Please use VFS - FR Manager Ver 1.20 as setting software.