[Appeared as a completed model as it is longing]
Introduced in 1985 as Tamiyas first shaft 4WD racing buggy. The reprinted version of the Hot Shot. which instantly captivated many fans with its combat-like form with a low center of gravity design and high-performance driving full of innovative mechanics. is now available in the finished model.
Based on the design concept of keeping the form and structure as untouched as possible. the chassis and form are the same as at the time. just for the updated reprint Hot Shot (2007). You can feel free to challenge the longing of that time.

[Enjoy comparing 4WD buggy runs]
The main mechanisms such as shaft drive 4WD and front and rear double wishbone suspension equipped with adjustable monoshock dampers remain the same. but the front and rear drive shafts and propeller shafts have been changed to highly reliable dogbone types. The oil damper is also a diaphragm type. which is currently the mainstream.
Also. since the ESC is installed. the rear aluminum heat sink is not necessary. but this part. which is also the point of the hot shot rear view. is equipped as a dummy.
The completed chassis is equipped with RC mechanics. and it also comes with a wheel trigger type transmitter suitable for driving the car. a running battery and a dedicated charger. so you can charge the battery as soon as you take it out of the box. Able to run. Im looking forward to comparing it with a modern 4WD buggy.
The ESC (Electronic Speed ​​Controller) is equipped with TBLE-04S. a model with a sensor that supports brushless motors of 15.5T or higher.

[Uses 2.4G radio that can be easily played with multiple units]
In addition to the painted body and the completed car body. a wheel trigger type transmitter that is ideal for car control. a 7.2V battery for driving. and a charger are also included.
The RC mechanism uses a 2.4GHz radio set that can be easily enjoyed with multiple units without the need for band adjustments such as crystal replacement. 2.4GHz. which is also used for computer wireless LAN. has a one-to-one correspondence between the transmitter and the receiver (vehicle). so there is no need to worry about interference. and the transmitter and receiver are already paired. There is no need for troublesome setup work.
In addition. the transmitter adopts a grip cover and a trigger cover. It can be adjusted by attaching and detaching. and it has a structure that is easy to operate even for people with small hands.

[Basic specifications]
��Overall length 390mm ��Overall width 235mm ��Overall height 150mm ��Body weight approx. 1270g ��Tread = 194mm (both front and rear) ��Tire width/diameter = F28/82mm R34/82mm ��Frame = ABS resin monocoque ��Drive system = shaft drive 4WD ��Differential gear = Front and rear 3 bevels ��Steering = 2 split tie rod type ��Suspension = 4-wheel double wishbone ��Gear ratio = 10.04:1 ��With 540 type motor ��With Tamiya speed controller
* Transmitter power supply (4 AA batteries) is sold separately.

Total length = 390mm *Details may differ from the product.

[Manufacturer page]
https://www.tamiya.com/japan/products/57785/index.html