TRIDAGGER WX(AR CHASSIS)
- JAN code:
-
4950344194490
- Item code:
-
19449
- Maker price:
-
\1,100 JPY
- Sale price:
-
\700 JPY
- Manufacture:
- TAMIYA
- Weight:
- 190g
- Categories:
- MINI 4WDBargain/Full cowl Mini 4wd
Total length = 155 mm The photograph shows the kit assembled and painted
Wild body with plenty of intimidating feeling characteristic of fur pattern
It is a plastic model assembly kit of a four-wheel drive racer with high performance running and a fun race.
Tri Dagger WX (Wildex) is a boys era of Takahiro Ryo that appears in mini 4WD manga Bakusan Brothers Lets & Go! Return Racers !!.
The gunmetal ABS resin body is reproduced by sculpting a characteristic fur pattern on the rear fender rear side and the cockpit side.
Metal sticker tightens the form.
The chassis adopts AR which can not only pursue aerodynamics but also the necessary elements for the mini 4WD race such as maintainability. rigidity. and expandability.
Body made of metallic gray ABS resin.
A parts such as under panels and diffusers are made of red friction resin.
We installed a low height tire (black) on a three-dimensional Y spoke wheel (red).
AR chassis
As well as pursuit of aerodynamics. the AR chassis is capable of repairing the elements necessary for the mini 4WD race such as maintainability. rigidity. and expandability.
The under panel and the diffuser which let the air on the bottom surface of the chassis flow smoothly can be removed with one touch.
If you remove the under panel. you can speedily replace the battery without removing the body. you can check the motor and gear if you remove the diffuser.
In addition. you can remove the motor by shifting the under panel forward.
In addition. it is a point that it is equipped with a low friction plastic bearings. reducing drive loss and realizing weight saving.
In addition. a rear skid bar is standard equipment.
When passing through a slope course such as a slope section. a low friction resin skid bar makes contact with the course road surface.
Controlling the attitude of the machine prevents the course out.
With 3.5: 1 super speed gear.
Basic Specification
When completed
Length 155 mm
Width 97mm
Overall height 43 mm
With motor
Assembly is an inlay type with no adhesive required
What you need separately
Two AA batteries
Wild body with plenty of intimidating feeling characteristic of fur pattern
It is a plastic model assembly kit of a four-wheel drive racer with high performance running and a fun race.
Tri Dagger WX (Wildex) is a boys era of Takahiro Ryo that appears in mini 4WD manga Bakusan Brothers Lets & Go! Return Racers !!.
The gunmetal ABS resin body is reproduced by sculpting a characteristic fur pattern on the rear fender rear side and the cockpit side.
Metal sticker tightens the form.
The chassis adopts AR which can not only pursue aerodynamics but also the necessary elements for the mini 4WD race such as maintainability. rigidity. and expandability.
Body made of metallic gray ABS resin.
A parts such as under panels and diffusers are made of red friction resin.
We installed a low height tire (black) on a three-dimensional Y spoke wheel (red).
AR chassis
As well as pursuit of aerodynamics. the AR chassis is capable of repairing the elements necessary for the mini 4WD race such as maintainability. rigidity. and expandability.
The under panel and the diffuser which let the air on the bottom surface of the chassis flow smoothly can be removed with one touch.
If you remove the under panel. you can speedily replace the battery without removing the body. you can check the motor and gear if you remove the diffuser.
In addition. you can remove the motor by shifting the under panel forward.
In addition. it is a point that it is equipped with a low friction plastic bearings. reducing drive loss and realizing weight saving.
In addition. a rear skid bar is standard equipment.
When passing through a slope course such as a slope section. a low friction resin skid bar makes contact with the course road surface.
Controlling the attitude of the machine prevents the course out.
With 3.5: 1 super speed gear.
Basic Specification
When completed
Length 155 mm
Width 97mm
Overall height 43 mm
With motor
Assembly is an inlay type with no adhesive required
What you need separately
Two AA batteries