Overall length = 390mm The photo shows the assembled kit.
The body is painted and cut.

[Red body with a hot fighting spirit is hot! ]
RC manga Radio Control Boy serialized in Shogakukan CoroCoro Comic started in 1983. It was a big success as the main character machine. and the Fire Dragon released as an electric radio control 4WD buggy in 1989 was reproduced.
The smooth. one-motion polycarbonate body is painted red and pre-cut. The body is completed just by sticking a sticker.
In addition. the cockpit also comes with a driver doll that enhances the feeling. so feel free to paint it.
The shaft drive 4WD chassis has a built-in differential gear in the front and rear sealed gearboxes for smooth cornering.
Double wishbone 4-wheel independent with CVA oil damper around the suspension.
You can enjoy light driving from on-road to off-road by installing spiked tires that demonstrate sufficient grip on the front and rear.

[Shaft drive 4WD chassis that is easy to assemble and maintain]
The chassis is a shaft drive 4WD that mounts the motor in the midship and uses the shaft for power transmission.
The RC mechanism is built into the lightweight and strong bathtub frame. and the front and rear gearboxes with the suspension are docked for easy maintenance.
The suspension has a simple structure of upper / I arm and lower / H arm. but double wishbone 4-wheel independent with excellent ground contact.
In addition to the four CVA oil dampers. a stabilizer is attached to the front to achieve supple driving.
In addition. the front and rear sealed gear cases have built-in unit type differential gears.
Another point is the adoption of an aluminum motor mount that has high accuracy and rigidity and excellent heat dissipation.
In addition. the gear case is made compact to ensure road clearance. Combined with 4WD. it produces high running performance on rough roads.

[Basic specifications]
�� Overall length 390 mm. overall width 240 mm. overall height 139 mm.
�� Wheelbase = 260mm
�� Minimum ground clearance = 23mm
�� Tread = front 203mm / rear 194mm
�� Frame = resin bathtub type
�� Tire width / diameter = 38 / 83mm for both front and rear
�� Drive system = Shaft drive 4WD
�� Differential gear system = 3 bevel differentials for both front and rear
�� Steering tie rod = 3 divisions
�� Suspension = double wishbone 4-wheel independent
�� Gear ratio = 7.68: 1
�� Motor = 540 type
�� Speed controller = ESC specification (sold separately)

[Items to be purchased separately]
�� Fine spec 2.4G electric RC drive set
�� 4 AA batteries for transmitter