��Comical style Grasshopper is full of health! ��
Since its introduction in 1984. 2 WD buggy. Grasshopper. which attracts many RC fans.
It is a completed electric radio control car which pretty deformed this glass hopper.
Shrinking the glass hopper back and forth. the body of the gentle form that emphasized the cockpit is made of light and durable polycarbonate.
Body and driver dolls are assembled and painted.
In addition. two antenna pole reminiscent of the tactile angle of the grasshopper. and a megaphone muffler with two pieces full of power at the rear are more comical.
The chassis has adopted the rear wheel drive WR - 02CB characterized by a bubble tire where you can play anywhere from paved roads to uneven off - roads.
Just grasp the throttle lever of the transmitter gently. you can enjoy the wheelie which lifted the front wheel.

��WR - 02CB chassis with rear wheel drive packing the fun to run
The chassis adopted WR - 02CB based on rear wheel drive WR - 02.
Easy to run even for beginners. and easy with a wheelie. I wear a long suspension arm and a CVA oil damper around my legs and run Gungung even on a rough off-road.
Of course. on-road driving is OK.
In addition. side chassis side guards set a side guard that protects the motor from falls by any chance. and brings out the buggys appearance.
Wheelie bar attached to the rear part not only prevents falling down when making a wheelie. it can adjust the wheelie running by changing the mounting position.
The combination of green and white eye-catching wheel has a two-piece structure and directs millet runs.
In addition. the tire has a highly straight pattern of rib pattern at the front and a round block with grip on the rear.
A rounded and unique shape bubble tire makes the comical mood even more exciting.

��Use 2.4G propo to play easily with multiple units��
As well as the painted body and the finished car body. we also installed a 7.2V battery for traveling and a charger on a wheel trigger type transmitter that is easy to control.
RC mecha does not need band adjustment. such as crystal exchange. adopt 2.4 GHz propo set which can be enjoyed easily with multiple units.
Because 2.4 GHz which is also used for the wireless LAN etc of the computer corresponds with 1: 1 transmitter and receiver (car body). there is no worry of interference and the transmitter and the receiver are already paired. There is no need for troublesome setup work.
Moreover. by removing the grip cover and the trigger cover. you can adjust the transmitter so that even a person with a small hand can operate easily.

��Basic Specification��
�� Overall length 356 mm. full width 244 mm. total height 195 mm
�� Wheel base 170mm
�� Motor = 540 type
�� Drive system = rear wheel two wheel drive
�� Tire Width / Diameter = Front 46 / 95mm. Rear 56 / 98mm
�� Tread = front: 189 mm. rear: 186 mm
�� Frame = resin monocoque type
�� Differential gear method = 3 bevel diff
�� Steering Tie Rod = 2 split
�� Suspension (both front and rear) = Double wishbone
�� Damper = CVA oil damper
Gear ratio = 1: 18.3
�� Equipped with ESC (Electronic Speed Controller).

��What you need separately��
�� Four AA size batteries for transmitter